Vm Power Management - ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - UPDATE 3 User Manual

Restart machine automatically if it is required for recovery
This option is effective when recovery takes place on a machine running an operating system.
The preset is Disabled.
The option defines whether to reboot the machine automatically if it is required for recovery. Such
might be the case when a volume locked by the operating system has to be recovered.
Reboot machine after recovery
This option is effective when operating under bootable media.
The preset is Disabled.
This option enables booting the machine into the recovered operating system without user
interaction.
Change SID after the recovery is finished
This option is not effective when recovery to a virtual machine is performed by Acronis Backup &
Recovery 10 Agent for ESX/ESXi or Acronis Backup & Recovery 10 Agent for Hyper-V.
The preset is Disabled.
Acronis Backup & Recovery 10 can generate an unique security identifier (SID) for the recovered
system. You do not need a new SID when recovering a system over itself or when creating a system
replica that will replace the original system. Generate a new SID if the original and the recovered
systems will work concurrently in the same workgroup or domain.
Use FTP in Active mode
The preset is: Disabled.
Enable this option if the FTP server supports active mode and you want this mode to be used for file
transfers.
3.4.2.8

VM power management

These options are effective for virtual machines residing on the virtualization servers.
These options are available only if any Acronis agent for virtual machines is installed on the
virtualization server.
Power off target virtual machines when starting recovery
The preset is: On.
Recovery to an existing virtual machine is not possible if the machine is online, and so the machine is
powered off automatically as soon as the recovery task starts. Users will be disconnected from the
machine and any unsaved data will be lost.
Clear the check box for this option if you prefer to power off virtual machines manually before the
recovery.
Power on the target virtual machine when recovery is completed
The preset is: Off.
133 Copyright © Acronis, Inc., 2000-2010