Adding Asd Command Line Utility To Pe 2.0; Uploading Pe Images To Acronis Pxe Server - ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual

Specify path to the destination folder of Bart PE builder
4. Specify the full path to the resulting file including the file name.
5. Check your settings in the summary screen and click Proceed.
6. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive. For how to upload the

15.2 Uploading PE images to Acronis PXE Server

.ISO to Acronis PXE Server, see .

15.1.3 Adding ASD command line utility to PE 2.0

1. Select Acronis -> Acronis Snap Deploy -> Acronis Snap Deploy PE Builder from the start
menu.
2. Do one of the following:
Specify path to the source WINPE.WIM file. The standard path to this file for x86 hardware is
\Program Files\Windows AIK\Tools\PETools\x86\winpe.wim.
or
Specify path to a folder with Win PE 2.0 unpacked files.
3. Specify the full path to the resulting file including the file name.
The builder will create a .WIM file if the source is WINPE.WIM.
You can choose whether to create .WIM or .ISO file if the source is the folder. Choose .WIM if you are
going to upload the PE image to the PXE server. Choose .ISO if you are going to put the PE image on
physical media.
4. Specify path to storage controller and NIC drivers that you want to add to Windows PE media. Click
Add and specify the path to the necessary *.inf file for a corresponding SCSI, RAID, SATA controller
or a network adapter. You will have to repeat this procedure for each driver you want to be included in
the resulting Win PE boot media.
5. Check your settings in the summary screen and click Proceed.
6. Burn the .ISO to DVD using a third-party tool or copy to a flash drive. For how to upload the .WIM
to Acronis PXE Server, see the next section.
15.2 Uploading PE images to Acronis PXE Server
You can upload to Acronis PXE Server either PE 1.0 .ISO or PE 2.0 .WIM.
To be able to upload a PE 1.0 ISO, copy the I386 folder from your Windows distribution CD to the
hard disk.
1. Start Acronis Snap Deploy Management Console
2. Click Configure PXE Server
3. Connect to the server
4. Click Upload PE to PXE Server
5. Do one of the following:
Specify path to PE 1.0 .ISO file to upload
or
Specify path to PE 2.0 .WIM file to upload
90 © Acronis, Inc