ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION Manual page 95

/type:[active | primary
| logical]
/preserve_mbr
/patching_sid
/license_server:[the
server IP]
/grant_server_license
To use the following options you must have the Acronis Universal Deploy add-on in your PE. Also, the
Acronis License Server must be accessible from the computer booted into the PE. For more
2.5 What is Acronis Universal Deploy.
information see
/ud_path:[path]
/ud_username:[user]
/ud_password:[pwd]
/ud_driver:[inf-filename]
© Acronis, Inc
Sets the deployed partition to active, primary or logical, if possible
(for example, there cannot be more than four primary partitions on
the disk.) Setting a partition to active always sets it to primary,
while a partition set to primary may stay inactive.
If the type is not specified, the program tries to keep the target
partition type. If the target partition is active, the deployed partition
is set to active. If the target partition is primary, and there are other
primary partitions on the disk, one of them will be set to active,
while the deployed partition becomes primary. If no other primary
partitions remain on the disk, the deployed partition is set to active.
When deploying a partition on unallocated space, the program
extracts the partition type from the image. For the primary
partition, the type will be set as follows:
- if the target disk is the 1st according to BIOS and it has no other
primary partitions, the deployed partition will be set to active
- if the target disk is the 1st according to BIOS and there are other
primary partitions on it, the deployed partition will be set to logical
- if the target disk is not the 1st, the deployed partition will be set
to logical.
When deploying a partition over an existing one, the target partition
is deleted from the disk along with its entry in the target disk MBR.
Then, with the /preserve_mbr option, the deployed partition's
entry will occupy the upper empty position in the target disk MBR.
Thus, the target disk MBR is preserved. If not specified, the
deployed partition's entry will occupy the same position as in the
source disk MBR saved in the image. If the position is not empty,
the existing entry will be moved to another position.
Generate the unique security identifier (SID) for the target
computer. If not specified, the SID of the master system will be
preserved.
Specifies the license server if the PE was booted from the PXE
server.
Permits to take a server product license for deploying a workstation
operating system (if the PE was booted from PXE server.)
Specifies using Acronis Universal Deploy and the path to the drivers
storage.
Specifies using Acronis Universal Deploy and the mass-storage
driver to be installed.
95