Chapter 4 Basic Operation; Power Up And Off; Touch Screen Control - ViewSonic ViewPad 10pi User Manual

Chapter 4 Basic Operation

Power up and off

1. Press on button located at top of device to power up.
Warning: Do not turn off the device before it is fully booted or it may cause an error
on the next power up.
2. In Windows 7, click Start>Shutdown> or push the
Note 1: Windows can be configured to automatically shut down by single
Windows help & support (Keyword "Power") for more power configuration information.
Note 2: Hard power off can be achieved by holding

Touch Screen Control

Tap: Quick single tap motion. Emulates left mouse click.
Tap & Hold: Press on open area for >4 seconds. Emulates right
Slide: Quick directional motion. Emulates scrolling.
Drag: Press on icon for >4 seconds then perform directional motion.
Emulates left mouse button hold.
Pinch: Two-points inward motion. Zoom in.
Spread: Two-points outward motion. Zoom out.
Note: An application can defines more complex hand gestures, availability based on application
support.
down for 4 second.
mouse click.
26
button to power off.
press. Please use