Dell PowerVault MD3260i Troubleshooting Manual page 7

Figure 3. MD Storage Manager Configure Management Ports
NOTE:
IPv4 and IPv6 are both supported protocols on the MD-series iSCSI storage arrays. Whichever
one you use, be aware of the following:
It is possible to enable both IPv6 and IPv4 on your host server. However, Dell

recommends that you disable the one you are not using before setting up your storage
array. Having both enabled may cause miscommunication between the storage array and
host server.
Make sure that the protocol you choose is enabled on both the storage array and host

server. Mixing protocols (for example, enabling IPv4 on the storage array and IPv6 on the
host server) will cause session interrupts and possible loss of data.
Once the storage array is successfully added to MD Storage Manager, all physical and logical
components of your storage array are manageable using the menu-based interface. For more
information on installing and using MD Storage Manager, see the Getting Started Guide and
Deployment Guide that shipped with your storage array. The Help option from the MD Storage
Manager main window also offer additional guidance.