Dell PowerVault MD3260 Owner's Manual page 55

Storage arrays
Hide thumbs Also See for PowerVault MD3260:
Table of Contents

Advertisement

Back-Panel Connectors (Per RAID Controller Module)
Management Ethernet connector
Power
AC power supply (per power supply)
Wattage
Heat dissipation (maximum)
NOTE: Heat dissipation is calculated using the
power supply wattage rating. The heat
dissipation values are for the entire system
which includes chassis and two controllers.
Voltage
NOTE: This system is also designed to be
connected to IT power systems with a phase to
phase voltage not exceeding 230 V.
Battery
Environmental
NOTE: For additional information about environmental measurements for specific system configurations, see
dell.com/environmental_datasheets.
Temperature
Operating
Storage
Relative humidity
Operating
Storage
Maximum vibration
Operating
Storage
One 100/1000 Mbps Ethernet connection for out-of-band
management of the enclosure
1755 W
5988 BTU/hr
220 V AC, autoranging, 50 Hz/60 Hz
6.6 V DC, 1100 mAh, 7.26 W Lithium ion battery
Continuous operation: 10 °C to 35 °C (50 °F to 95 °F) at 20% to
80% relative humidity (RH), with 26 °C maximum dew point. De-
rate maximum allowable dry bulb temperature at 1 °C/300 m (1
°F per 550 ft) above 900 m (2952.75 ft).
NOTE: For information on supported expanded operating
temperature range and configurations, see the Owner's
Manual at support.dell.com/manuals.
–40 °C to 65 °C (–40 °F to 149 °F) with a maximum temperature
gradation of 20 °C per hour
20% to 80% (noncondensing) with maximum humidity gradation
of 10% per hour
5% to 95% at a maximum wet bulb temperature of 38 °C (100.4
°F)
0.26 G
at 5 Hz to 350 Hz in operational orientation
rms
1.88 G
at 10 Hz to 500 Hz for 15 minutes (all six sides tested)
rms
55

Advertisement

Table of Contents
loading

Table of Contents