Technical Specifications - Dell PowerVault MD3060e Getting Started Manual

Storage arrays
Hide thumbs Also See for PowerVault MD3060e:
Table of Contents

Advertisement

Technical Specifications

NOTE: The following specifications are only those required by law to ship with your system. For a complete and
current listing of the specifications for your system, go to support.dell.com.
Power
AC power supply (per power supply)
Wattage
Heat dissipation (maximum)
NOTE: Heat dissipation is calculated using the
power supply wattage rating. The heat
dissipation values are for the entire system
which includes chassis and two controllers.
Voltage
NOTE: This system is also designed to be
connected to IT power systems with a phase
to phase voltage not exceeding 230 V.
Battery
Physical
Height
Width
Depth
Weight (maximum configuration)
Weight (empty)
Environmental
NOTE: For additional information about environmental measurements for specific system configurations, see
dell.com/environmental_datasheets.
Temperature
Operating
Storage
8
1,755 W
5988 BTU/hr
220 V AC, autoranging, 50 Hz/60 Hz
6.6 V DC, 1100 mAh, 7.26 W Lithium Ion Battery
177.80 mm (7.0 inch)
482.60 mm (19.0 inch) with rack latches
825.50 mm (32.5 inch) without bezel and handle
105.20 kg (232.0 lb)
19.50 kg (43.0 lb)
Continuous operation: 10 °C to 35 °C (50 °F to 95 °F) at 20% to
80% relative humidity (RH), with 26 °C maximum dew point. De-
rate maximum allowable dry bulb temperature at 1 °C/300 m (1
°F per 550 ft) above 900 m (2952.75 ft).
NOTE: For information on supported expanded operating
temperature range and configurations, see the Owner's
Manual at support.dell.com/manuals.
–40 °C to 65 °C (–40 °F to 149 °F) with a maximum temperature
gradation of 20 °C per hour

Advertisement

Table of Contents
loading

Table of Contents