Desa VSGF36NR Owner's Operation And Installation Manual page 17

INSTALLATION
Continued
INSTALLING LOGS (MODELS
VSGF36NT, VSGF36PT, VSGF36NR
AND VSGF36PR)
WARNING: Failure to posi-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically
approved with this heater may
result in property damage or
personal injury.
CAUTION: Do not remove
the data plates attached to the
heater base assembly. The data
plates contain important safety
and warranty information.
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use logs
supplied with heater.
1. Place front log on top of the grate. Make sure
the notches in the bottom of the log fit over
the grate prongs (see Figure 20). Push back
of logs flush with metal grate bars.
2. Rest middle log behind metal posts on grate as-
sembly. Make sure the grooves in the bottom of
the log fit over the grate. Bring the log forward
next to the metal posts (see Figure 21).
3. Slide the grooves in the back of the rear log
against the rear grate prongs. Make sure the log
fits securely over the prongs (see Figure 22).
Make sure log is completely vertical and not
leaning in toward burner where the flame will
touch the log.
Notch
Grate
Prongs
Figure 20 - Installing Front Log
113192-01B
Front Log
Metal
Grate
Bars
www.desatech.com
WARNING: You must operate
this fireplace with the fireplace
screen in place. Make sure fire-
place screen is in place before
running fireplace.
Figure 21 - Installing Middle Log
Figure 22 - Installing Rear Log
17