Connect The Notebook To The Port Replicator - Fujitsu FPCM11752 Operating Manual

Working with the notebook

Connect the notebook to the port replicator

► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
1
3
2
► Position the notebook on the port replicator in such a way that the docking connector on the
underside of the notebook is aligned with the docking connector of the port replicator as shown.
► Press down on the notebook's rear corners so that it locks into position.
► Connect the mains adapter cable to the DC jack (DC IN) of the port replicator (1).
► Connect the power cable to the mains adapter (2).
► Plug the power cable into the mains socket (3).
72 Fujitsu Technology Solutions