Sim Card; Inserting The Sim Card - Fujitsu FPCM11752 Operating Manual

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook and, together with an integrated UMTS module, enables access to a mobile radio network.
When handling SIM cards, follow the instructions supplied by the provider.

Inserting the SIM card

► Prepare for insertion of the SIM card, see chapter
► Open the protective rubber cover of the SIM card slot.
Do not pull on the SIM card lock! The lock could break off otherwise. Always
slide the lock in the direction of the arrow as shown.
1
3
2
► Close the protective rubber cover of the SIM card slot.
► Complete the insertion process, see chapter
Fujitsu Technology Solutions
a
"Preparing to remove components", Page
► Slide the SIM card lock (a) in the
direction of the arrow (1).
The clip (a) controls the power supply for
the UMTS module. The UMTS module is
switched off while the clip is open.
► Slide the SIM card as shown into
slot (2) until it engages.
► Slide the SIM card lock (a) in the
direction of the arrow (3).
"Finishing component removal", Page
Working with the notebook
108.
105.
67