Pen Input Not Working; The Notebook Cannot Be Started; The Notebook Stops Working - Fujitsu FPCM11752 Operating Manual

Pen input not working

Cause
Incorrect driver installed.

The notebook cannot be started

Notebook
Cause
The battery is not installed correctly.
The battery is dead.
The power adapter is not connected correctly.

The notebook stops working

Notebook Energysaving mode
Cause
Notebook is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.
Fujitsu Technology Solutions
Troubleshooting
► If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
► Check whether the mains adapter is
connected correctly to the notebook.
► Switch the notebook on.
Troubleshooting
► Leave energy saving mode.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapter to the
notebook.
Troubleshooting and tips
115