Safety Information; Product Identification; Local Codes; Unpacking - Comfort Glow RGA 2-72 Owner's Operation And Installation Manual

SAFETY INFORMATION

Continued
11. Do not run log set
• where fl ammable liquids or vapors are used or stored
• under dusty conditions
12. Do not burn solid fuel in the fi replace after installing the log set. Do
not use this log set to cook food or burn paper or other objects.
13. Log set becomes very hot when in use. Keep children and adults
away from hot surface to avoid burns or clothing ignition. Log
set will remain hot for a time after shutdown. Allow surface to
cool before touching.
14. Carefully supervise young children when they are in the room
with log set.
15. Do not use appliance if any part has been exposed to or under
water. Immediately call a qualifi ed service technician to inspect
the room appliance and to replace any part of the control system
(if using GA9050A or GA9150A) and any gas control which
has been under water.
16. To help prevent breakage, new logs must be broken-in (see
Curing Logs page 10).
17. Turn log set off and let cool before servicing, installing, or re-
pairing. Only a qualifi ed service person should install, service,
or repair log set.
18. Provide adequate clearances around air openings.

PRODUCT IDENTIFICATION

Grate
Burn-
Burner
er Pan
Clamp
Burner
Manifold
Figure 1 - Product Identifi cation (Dual Burner Shown)
Hearth Kit Model _________________________
Serial Number ___________________________
Log Set Model ___________________________
115043-01
Grate Steps
Burner Inlet
Fitting
For more information, visit www.desatech.com

OPTIONAL PRODUCT FEATURES

LOCAL CODES

Install and use log set with care. Follow all local codes. In the
absence of local codes, use the latest edition of The National Fuel
Gas Code ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269

UNPACKING

CAUTION: Do not remove the data plates from
the burner pan. The data plates contain important
product information.
1. Remove logs, hearth kit, pan materials, and hardware from car-
ton.
2. Remove all protective packaging applied to logs and base for
shipment.
3. Check all items for any shipping damage. If damaged, promptly
inform dealer where you bought the product.
OPTIONAL PRODUCT FEATURES
ON/OFF SAFETY VALVE/PILOT KIT AND PRO-
PANE/LP CONVERSION
An optional valve/safety pilot kit with a piezo ignitor is available
for this appliance. This system requires no matches, batteries, or
other sources to light. You must use this optional system for LP
conversion. See Accessories, page 15.
REMOTE CONTROL READY (MILLIVOLT)
SAFETY VALVE/PILOT KIT
An optional millivolt valve/safety pilot kit with a piezo ignitor is avail-
able for this appliance. This system requires no matches, batteries, or
other sources to light. This system may be connected to a wall switch
or hand-held wireless remote control. See Accessories, page 15.
REMOTE CONTROL ACCESSORIES
There is an optional hand-held ON/OFF remote control that can
be purchased separately for this log set. You must use the millivolt
valve/safety pilot kit to use remote accessories with this appliance.
See Accessories, page 15.
A wall switch is also available for this appliance. You must use
the millivolt valve/safety pilot kit to use the wall switch with this
appliance. See Accessories, page 15.
SAFETY INFORMATION
PRODUCT IDENTIFICATION
LOCAL CODES
UNPACKING
3
3