About Dme Designer - Yamaha DME64N - Pro Audio Owner's Manual

Digital mixing engine

Hide thumbs Also See for DME64N - Pro Audio:

Table of Contents

About DME Designer

DME Designer software enables you to integrate, configure, and control the DME series system from a con-

nected computer.

You can build the DME series audio system using graphic blocks in DME Designer that are displayed on the

computer monitor.

The DME series settings, configuration, and parameter data are transferred from the computer to the DME se-

ries unit via the USB or Ethernet connection.

DME series settings, configuration, and parameter data is sent via USB or Ethernet to the connected DME se-

ries unit. After the data is transmitted, you can disconnect the DME series unit from the computer and use it

as an independent processor.

You can also connect it to a computer and control it in realtime from DME Designer.

If multiple DME series units are connected in the network, DME Designer enables you to build a configuration

that includes those units.

Please download the DME Designer application, driver, DME setup manual, and DME Designer Owner's

Manual at the following URL: http://www.yamahaproaudio.com/

Refer to the "Connecting to a Computer" (page 22) for more information on connecting a computer to the

DME64N/24N. For details on how to install DME Designer and the drivers that are required for connection,

refer to the "DME Setup Manual."

Refer to the DME Designer Owner's Manual for setup and operation instructions.

DME64N/DME24N Owner's Manual

Table of Contents

Dme24n