Clock And Alarms - Sonos Controller for MAC Product Manual

5-4

Clock and Alarms

This section discusses how to use the clock and alarms features on your Sonos Controller for Mac or PC.
Setting date and time
From the Zones menu, select Clocks and Alarms.
1.
Click the Date and Time button.
2.
Choose one of the following options:
3.
• Select your time zone, desired time format, and date format, and then click OK.
• Select the Select the date and time from the Internet radio button, and then click OK.
• Select the Set the date and time manually radio button. Make your selections from the displayed fields, and then click
OK.
Adding an alarm
From the Zones menu, select Clocks and Alarms.
1.
Click New.
2.
Choose the desired settings for this alarm, including the alarm time, the zone you would like the alarm to play in, the
3.
music source you'd like to play from, the frequency of the alarm, and the volume and duration settings.
Note: If the music you've selected is not available (such as an Internet radio station that has
dropped off), your alarm will play the Sonos chime instead.To stop the chime, you can press
Pause.
• If you check Include linked zones, the alarm will play in the zones that are linked together at the time the alarm goes
off. It does not play in the zones that were linked when the alarm was originally added to the Sonos system.
• If you check Shuffle music, the play mode for the selected alarm music will be set to shuffle.
Editing an alarm
From the Zones pane, click to highlight the zone you want to change the alarm setting for.
1.
From the Zones menu, select Clocks and Alarms.
2.
Select the alarm you wish to change, and click Edit.
3.
Make the desired changes, and click OK.
4.
• If you check Include Linked Zones, the alarm will play in the zones that are linked together when the alarm goes off.
It does not play in the zones that were linked when the alarm was originally added to the Sonos system.
User Guide