Table of Contents
Advertisement
2-18
SONOS CONNECT:AMP Back
Ethernet switch connectors (2)
Right speaker terminals
Left speaker terminals
Voltage select
AC power (mains) input
Analog audio in
Subwoofer output
Note: If you disconnect your subwoofer, make sure to
also disconnect the subwoofer's cable from the
CONNECT:AMP output.
Use Category 5 Ethernet cable to connect to a router, computer, or additional network
device such as a network-attached storage (NAS) device.
LED indicators:
•
Green (link connection)
•
Flashing Yellow (network activity)
Use high-quality speaker wire to connect the right speaker to the CONNECT:AMP.
Use high-quality speaker wire to connect the left speaker to the CONNECT:AMP.
AC 115/230 V
Select the voltage setting that is appropriate for your country.
Use the supplied power cord to connect to power outlet.
Use a standard RCA audio cable to connect the audio outputs from a separate audio
component such as a CD player, to the Sonos component's analog audio inputs.
Connect a powered subwoofer to this output using a standard RCA cable. The system will
detect when a cable is connected to the subwoofer output and adjust the crossover
frequency automatically.
User Guide
Advertisement
Table of Contents
