Cleaning And Maintenance; Troubleshooting - Desa Comfort Glow CGCF26TP Owner's Operation And Installation Manual

CLEANING
AND
MAINTENANCE
TROUBLE-
SHOOTING
All troubleshooting
Note:
items are listed in order of
operation.
103667
Turn off fireplace and let cool before cleaning.
You must keep control areas, burner, and circulating air passage-
ways of fireplace clean. Inspect these areas of fireplace before each
use. Have fireplace inspected yearly by a qualified service person.
Fireplace may need more frequent cleaning due to excessive lint
from carpeting, bedding material, etc.
ODS/PILOT AND BURNER
• Use a vacuum cleaner, pressurized air, or small, soft bristled brush to clean.
CABINET
Air Passageways
• Use a vacuum cleaner or pressurized air to clean.
Exterior
• Use a soft cloth dampened with a mild soap and water mixture. Wipe the
cabinet to remove dust.
Turn off and unplug fireplace and let cool before servicing. Only a
qualified service person should service and repair fireplace.
Never use a wire, needle, or similar object to clean ODS/pilot. This
can damage ODS/pilot unit.
OBSERVED POSSIBLE
PROBLEM CAUSE
When ignitor button 1. Ignitor cable pinched or
is pressed, there is no
spark at ODS/pilot
2. Ignitor electrode not con-
3. Broken ignitor cable
4. Bad piezo ignitor
5. Ignitor electrode broken
6. Ignitor electrode posi-
WARNING
WARNING ICON G 001
CAUTION
WARNING ICON G 001
WARNING
WARNING ICON G 001
CAUTION
WARNING ICON G 001
wet
nected to ignitor cable
tioned wrong
REMEDY
1. Free ignitor cable if
pinched by any metal or
tubing. Keep ignitor
cable dry
2. Reconnect ignitor cable
3. Replace ignitor cable
4. Replace piezo ignitor
5. Replace ignitor
6. Replace ignitor
25