Russound ST2-XM2 1 Manual page 29

3. MEMORY NAME appears on the tuner.
4. Press BAND.
5. Bank # appears.
6. Press the Tune Up/Down buttons to select the
Bank #.
7. Press BAND to advance. Memory # appears.
8. Press the Tune Up/Down buttons to select a
Memory #.
9. Press BAND to advance. MEMORY NAME
appears again.
10. Press BAND to access the Memory Name
entry screen.
Press TNR SEL
button to select
XM Tuner
TNR TNR
SEL
SEL
TUNER
SETUP
Menu
TNR
SEL
MEM
NAME
Procedure
ST2-XM2 TUNER PROGRAMMING
XM Setup Menu
Bank Name Procedure
SOURCE
UPDATE
NUM
FIRMW
Procedure
Procedure
BANK CONTROLLR DIAGNOSTICS
NAME ID
Procedure
Procedure
TNR
SEL
BANK
BANK #
NAME
Selects
character
Selects
character
position
Repeat
for each
character
in name
ST2 TUNER SETUP MENU
11. Press Tune Up/Down to select a character
and MEM Up/Down to change a character
position. Up to 12 characters can be entered
one by one. A blinking cursor indicates the place-
ment of the character being entered.
12. Press BAND when memory name is entered.
13. SAVE CHANGES will appear.
14. Press Tune Up/Down to select Yes or No.
15. Press BAND to save memory name. The
Memory Name menu returns to the Memory #
prompt to name other presets, or press TNR
SEL to return to the Memory Name menu start.
FACTORY SYSTEM
INIT INFO
Procedure Procedure
FACTORY
Procedure INIT
Procedure
SAVE
CHANGES?
Chassis
Setup
Menu
XM
SYSTEM
INFO
Setup
Procedure
Menu
29