A-Bus Ready Sub-Zone Connection - Russound CAV66 2 Instruction Manual

INSTALLER
MAKING CONNECTIONS

A-BUS Ready Sub-Zone Connection

A-BUS products can easily expand the CAV6.6
audio system by adding A-BUS Ready Sub-zones
to the first four CAV6.6 zones. The A-BUS Ready
Sub-zones are located on the back of the
CAV6.6 at the bottom left corner. The A-BUS
Ready Sub-zones are powered by a 24VDC
power supply such as the A-PS.
Use an RJ-45 CAT-5 T568A configuration patch
cable to connect the A-BUS Ready Sub-zone
34
port to an RJ-45 wall plate (optional) for a clean
installation. Using the same T568A RJ-45 wiring
configuration, attach CAT-5 from the RJ-45 wall
plate to an A-BUS hub or amplified control mod-
ule such as the A-KP2 keypad.
If using an A-BUS hub with the A-BUS Ready Sub-
zone, the hub should be located near the
CAV6.6 and wired directly instead of first going
through the wall plate.
V+ V- L+ L- R+ R- IR ST
V+ V- L+ L- R+ R- IR ST