Uno-S2 Keypad Location And Installation - Russound CAM66X Instruction Manual

Keypad Installation
To install a double-gang keypad, you will need to
use a UL/CSA approved plastic double-gang
electrical box.
Route CAT-5 wire to the junction box from the
CAM6.6.
Use the supplied 110 punchdown tool to con-
nect each wire to its corresponding color
labeled on the punchdown terminal.
Plastic Double-Gang
Electrical Box
Screw
UNO-S2 KEYPAD-INSTALLATION
Ensure jumper settings on keypads are in the
run positions.
Mount the keypad in the electrical box and
attach the cover plate. Repeat the steps until all
keypads are installed.
UNO-S2
Back Plate
INSTALLER
Keypad Location
Screw
Screwless
Cover Plate
35