Sample Configurations - Russound CAM66X Instruction Manual

SAMPLE CONFIGURATIONS

MULTIPLE CONTROLLERS WITH ST2 DUAL TUNER
Sharing an ST2 Dual Tuner with multiple CAM6.6 con-
trollers (no built-in tuners)
This configuration is suitable for 7 to 12 zones that
can all access the ST2 Dual Tuner. This configuration
uses RCA "Y" cables from the ST2 Tuner source out-
puts to connect to both CAM6.6 source inputs.
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 1
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
110
L OOP
ST2
Smart Tuner
A
NEWMARKET, NH U.S.A. NTENNA
FM C
OAX
LINK RS-232 K EYPAD P ORTS
INTERFACE
I O
N UT
UNO-S1 Keypads
102.5
102.5
UNO-S1 UNO-S2
CNBC CNBC
to Source 1 input on CAM6.6 (1)
RCA cable connected from ST2 Tuner 2 audio output
to Source 2 input on CAM6.6 (1)
CAM6.6 (no tuner installed) -
Controller Setup Menu: Controller ID = 2
Source Setup Menu: Basic Setup Procedure:
Source # = 1; Source Name = Tuner 1;
Command Type = Peripheral
Source # = 2; Source Name = Tuner 2;
Command Type = Peripheral
Output/Input Switch = Input
RCA cable connected from ST2 Tuner 1 audio output
to Source 1 input on CAM6.6 (1)
RCA cable connected from ST2 Tuner 2 audio output
to Source 2 input on CAM6.6 (2)
ST2-XM Tuner Back Panel
T UNER 2 T UNER
A UDIO O UTPUT A UDIO O UTPUT
L R L R
A
IR NTENNA IR
RCA "Y" Cable
RCA Cable
RCA Cable
CAM6.6
CAM6.6 Back Panel
(Controller ID 1)
CAM6.6
CAM6.6 Back Panel (Controller ID 2)
Serial#
1
12VDC 1.5A