Russound SaphIR 854 Instruction Manual

block.
the to hardwire
stereo " 1/8(3.5mm)
854 the installations,
an using
an to directly
SUPPLY POWER
12VDC 846C
FOLD
LIMITED WARRANTY
The Russound 854 IR Receiver is fully guaranteed for ten (10) years from the date of pur-
chase against all defects in materials and workmanship. For this warranty to apply, the
unit must be installed and used according to its written instructions. During this period,
Russound will replace any defective parts and correct any defect in workmanship without
charge for either parts or labor. Accidental damage and shipping damage are not consid-
ered defects under the terms of this warranty. Russound assumes no responsibility for
defects resulting from abuse or servicing performed by an agency or person not specifi-
cally authorized in writing by Russound. If service is necessary, it must be performed by
Russound. Damage to or destruction of components due to excessive power voids the
warranty. In these cases, the repair will be made at the owner's expense. To return for
repairs, the unit must be shipped to Russound at the owner's expense, along with a note
explaining the nature of the service required. Be sure to pack in a corrugated container
with at least 3 inches of resilient material to protect the unit from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for a Return
Authorization number. Write the RA number on the shipping label and ship to: Russound,
ATTN: Service, 5 Forbes Road, Newmarket NH 03857
Russound sells product only through authorized Dealers and Distributors to ensure that
customers obtain proper support and service. Any Russound product purchased from an
unauthorized dealer or other source, including retailers, mail order sellers and online sellers
will not be honored or serviced under existing Russound warranty policy. Any sale of
products by an unauthorized source or other manner not authorized by Russound shall
void the warranty on the applicable product.
5 Forbes Rd. Newmarket, NH 03857, USA
☎ 603.659.5170 • Fax 603.659.5388
connecting IRB-6 or 857 the on plug termination
to preferable be may it installations, remote
the using jack IN RECEIVER IR the to
both In block). connecting in-wall
mounting (remote Remote and 857) e.g.,
(connected Direct installations: typical two
RECEIVER IR 854
BLOCK CONNECTING
INSTALLATION CONNECTION
REMOTE
BLOCK CONNECTING 857
KOREA IN MADE USA IN DESIGNED
SIGNAL
STATUS
GND
+
12VDC
I C IR
N OMMON WIRE CONDUCTOR
GAUGE 22 AW2260AB
N I ECEIVER R IR
+12VDC
OWER P
INSTALLATION
+12VDC
S
TATUS
DIRECT
e-mail: tech@russound.com
Come visit us at:
FOLD
4-position
In mini-plug.
connected be may
IRB-1 e.g., interface,
mini-plug
block, connecting IR
in used is 854 The
INSTALLATION
IRB-1
RECEIVER IR
4
RECEIVER IR 854
from
control
FOLD
Sleeve
stereo (3.5mm) 1/8"
Ring
on Conductors
Tip
+12VDC
GND
SIGNAL
42mm) x 18mm x (57mm
1.68"D x 0.72"H x 2.28"W
max. 31mA 12VDC
55ft to 30ft – Axis Off 30º
80ft to 55ft – Axis On
56kHz and 40kHz
58kHz to 36kHz
mini-plug stereo (3.5mm) 1/8"
remotes of types many from IR
LED
operation for equipment audio/video the
remote IR handheld a from signals IR receives
854
Mini Tabletop Infrared
Receiver
Instruction Manual
CONNECTIONS WIRE
Dimensions:
Power:
Range:
Frequency: Transmit
Frequency: Receive
SPECIFICATIONS
with cable 36-inch •
base Non-skid •
receives IR band Wide •
confirmation IR Blue •
FEATURES
room. another
to signals the relays and
Receiver IR 854 The
OVERVIEW PRODUCT
FOLD