Dell DX6000 Installation And Configuration Manual page 24

The following information is required for all configured remote clusters:
Parameter
Remote Cluster Name
Host
Port
User ID
Password/Confirm Password
The CSN Console should be used for all configuration updates, but, for reference purposes, all
SCSP Proxy configuration parameters are stored in the configuration file: /etc/caringo/scspproxy/
scspproxy.cfg and /etc/caringo/scspproxy/hosts.cfg. These files are automatically generated and
should never be manually edited unless under direction of your support personnel.
The scspproxy service will be started automatically after the initial configuration of the CSN. If
needed, it can be started, stopped or restarted via a standard init.d script:
Copyright © 2010 Caringo, Inc.
All rights reserved
Description
The alpha-numeric name for a remote cluster
that will be used in requests sent to the proxy.
May not contain whitespace. May be the DNS
name for the cluster but that is not required.
The IP address or hostname of the remote
proxy the local proxy will communicate with.
May not contain whitespace.
The port on which the remote proxy will listen
incoming requests. This is usually port 80. May
not contain preceding or trailing whitespace.
The name of an administrator that belongs to
the DX Storage Administrators group for the
remote cluster. May not contain whitespace.
The password for the administrator specified
in the User ID field. This value may contain
spaces as long as they are not leading or
trailing.
21
Version 2.0
December 2010