Raid Driver Installation; Creating A Raid Driver Disk - Asus P7F-X SATA User Manual

6.1

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install
an operating system to the independent hard disk drive or bootable array. This
part provides instructions on how to install the RAID controller drivers during OS
installation.
6.1.1

Creating a RAID driver disk

The system does not include a floppy drive. You have to use a USB floppy drive
when creating a SATA RAID driver disk.
A floppy disk with the RAID driver is required when installing Windows
system on a hard disk drive that is included in a RAID set. You can create a RAID
driver disk in DOS (using the Makedisk application in the support DVD).
To create a RAID driver disk in DOS environment
1. Place the motherboard support DVD in the optical drive.
2. Restart the computer, and then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the support DVD.
Save your changes, and then exit the BIOS Setup.
4. Restart the computer. The Makedisk menu appears.
Create Driver Diskette Menu
PCH INTEL RAID Driver
PCH LSI RAID Driver
FreeDOS command prompt
5. Use the arrow keys to select the type of RAID driver disk you want to create
and press <Enter> to enter the sub-menu.
PCH INTEL RAID Driver
PCH INTEL RAID Driver
Windows 32 bit(also support AHCI)
Windows 64 bit(also support AHCI)
Back
Exit
ASUS P7F-X Series
®
operating
6-3