Dell DX6000 Administration Manual page 64

domain=cluster.example.com&admin&recreatecid=c0d0fa42bccac73cd3f2324bb53e40a5"
--digest -u "admin:ourpwdofchoicehere"
5. Create the _administrators bucket for the domain.
curl -i -X POST -H "Cache-Control: no-cache-context" -H "Castor-
Authorization: domain-name/_administrators" -H "Castor-Stream-Type:
admin" -H "lifepoint: [] reps=16" --data-binary '' --post301 --location-
trusted "http://node-ip/_administrators?domain=domain-name&admin" --
digest -u "your-username:your-password" [-D log-file-name]
Note
The following error indicates you omitted --post301 from the command:
CAStor Error Content-Length header is required
For example, to create the cluster.example.com/_administrators bucket:
curl -i -X POST -H "Cache-Control: no-cache-context" -H "Castor-
Authorization: cluster.example.com/_administrators" -H "Castor-
Stream-Type: admin" -H "lifepoint: [] reps=16" --data-binary '' --
post301 --location-trusted "http://172.16.0.35/_administrators?
domain=cluster.example.com&admin" --digest -u "admin:ourpwdofchoicehere"
6. To verify the procedure worked, access the Admin Console as discussed in
Introduction to the Admin
7. On the cluster status page, click Settings.
8. In the Cluster Tenants section, make sure the domain name and protection setting display
correctly.
The following figure shows an example.
9. Click Edit next to the name of the domain you just restored.
10. C lick Add Domain Manager.
11. F ollow the prompts on your screen to create a domain manager.
The following figure shows an example.
Copyright © 2010 Caringo, Inc.
All rights reserved
Console.
59
Chapter 2,
Version 5.0
December 2010