Dell DX6000 Administration Manual page 38

Option Name
domainHeaders
gateway
group
hpStartDelay
icmpAcceptRedirects
igmpVersion
ioErrorTolerance
ipaddress
licenseFileURL
loghost
loglevel
logport
maxreps
Copyright © 2010 Caringo, Inc.
All rights reserved
Default
none
none
225.0.10.100
900
true
2
200
none
file:///caringo/license.txt
none
40
514
16
33
Description
A comma-separated list of headers in which
to search for the host in an SCSP request.
By default, the setting is X-Forwarded-
Host, Host
IP address of the default gateway in the
subnet. This is only used when ipaddress is
set in the configuration file.
This is the multicast address for the cluster.
It must be a Class D IP address in the
range 224.0.0.0 - 239.255.255.255. This
address must be unique for each cluster.
Administrators must exercise care when
configuring multiple, distinct clusters to
ensure the multicast groups do not overlap,
as any node with the same multicast group
will become part of a single cluster.
Number of seconds after a node starts
before the health processor begins checking
the cluster for the required number of
replicas for content stored on this node.
Determines whether or not the node accepts
routing information from ICMP redirect
responses. Valid values are true and
false.
The IGMP version used for host membership
queries. Valid values: 1, 2, 3
Number of IOErrors after which a node is
taken offline automatically during a retire.
Static IP address for a node. If this is not set,
a node will use DHCP to obtain its address
information.
Location and name of the DX Storage
license file. The default location must not be
modified to utilize the default 2TB license.
IP address of an optional Syslog server.
Controls the minimum level of messages
sent to the loghost. Critical messages
are logged at higher levels while minor
messages are logged at lower ones.
60=announcement, 50=critical, 40=error,
30=warning, 20=info, 10=debug, 0=no
logging.
Sets the syslog port to use.
The maximum number of stream instances
that can be specified in the cluster. This
is required to be 1 or higher and must
equal or exceed the value of minreps
Version 5.0
December 2010