Updating A Realm Using Put - Dell DX6000 Application Manual
Dx object storage application guide version 5.0
Hide thumbs
Also See for DX6000:
- Hardware owner's manual (198 pages) ,
- Getting started with your system (124 pages) ,
- Administration manual (74 pages)
Table of Contents
Advertisement
curl -I --anyauth -u "fred.bell:fred" --location-trusted
"http://172.16.0.35/_administrators" -D get-mgr-realm.log
The Castor-Authorization header in this example is:
Castor-Authorization: cluster.example.com/_administrators
The Castor-Authorization header indicates your cluster manager gave the domain manager
realm complete control over the realm. The domain manager realm is associated with the
cluster's _administrators bucket.
3. APPEND the user list to the realm using the following command:
curl -X APPEND --data-binary @cluster_example_com_administrators --
anyauth -u "fred.bell:fred" --location-trusted "http://172.16.0.35/
_administrators" --post301 -D domain-mgr-realm.log
4. GET the updated user list.
curl --anyauth -u "larry.green:larry" --location-trusted
"http://172.16.0.35/_administrators" -D get-mgr-realm2.log
The domain realm displays:
fred.bell:cluster.example.com/
_administrators:88582109557482d06f848e0547cad4e8
jeannie.clark:cluster.example.com/
_administrators:2ca704efc81815306542605e581e9145
larry.green:cluster.example.com/
_administrators:43f8a5b20226bbecccd059e484309468
A CAStor Error might indicate that the preceding command has not been updated from the
content cache. Try the command again. If errors persist, verify your command syntax.
14.3.3. Updating a Realm Using PUT
To replace a user list with another user list, you must use PUT instead of APPEND. However,
because PUT also replaces headers (in particular the Castor-Authorization header), you must
use PUT with caution. Improper use of PUT can prevent users from authenticating.
To use PUT, first use a HEAD request to get the current Castor-Authorization header on the
object and then pass the same header in with the PUT command.
To update a realm using PUT:
1. Use the following commands to create a new domain realm:
htdigest -c cluster_example_com cluster.example.com john.rogers
htdigest cluster_example_com cluster.example.com jane.lalane
2. Dell strongly recommends you HEAD the domain to get the Castor-Authorization header
for the domain as follows:
curl -I --anyauth -u "larry.green:larry" --location-trusted
"http://172.16.0.35?domain=cluster.example.com" -D get-domain-realm3.log
Copyright © 2010 Caringo, Inc.
All rights reserved
57
Version 5.0
December 2010
Advertisement
Table of Contents
