Setdhcp; Setstatic_Ip, --Ip <Ip Address>, --Netmask; Netmask>, --Gateway <Ip Address; Setdns, --Suffix <Dns Suffix>, --Primary - Dell DR4000 Reference Manual

Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0: Determining IP information for
bond0... done. [ OK ]

--setdhcp

To configure the DR4000 system to change to use the DHCP IP addressing,
enter the example command string at the system prompt:
administrator@mydr4000 > network --setdhcp
Bond device operation successful. Please run 'network --
restart' for the changes to take affect.
--setstatic_ip, --ip <ip address>, --netmask <netmask>, --gateway <ip
address>
To configure the DR4000 system to use a static IP address (and/or configure
the corresponding netmask and the routing gateway for a DR4000 system),
enter the example commands string at the system prompt:
administrator@mydr4000 > network --setstatic_ip
--ip 10.20.20.20 --netmask 255.255.222.0
--gateway 10.25.20.10
Bond device operation successful. Network restart is
necessary for the changes to take effect.
If no options are specified, the following prompts are shown:
administrator@mydr4000 > network --setstatic_ip
--ip missing: static IP address to use
--netmask missing: netmask for the static IP address
--gateway missing: gateway for routing
--setdns, --suffix <dns suffix>, --primary <ip address> [--secondary <ip
address>]
To configure the Domain Name System (DNS) for a DR4000 system, which
includes the corresponding DNS suffix, primary name server IP address (and
an optional secondary name server IP address), enter the example commands
string at the system prompt:
26
Managing the DR4000 System