--start, --name <name>, --role <source | target>
To start the replication process on an existing replication link to a container in
a DR4000 system, enter the example command string at the system prompt:
administrator@mydr4000 > replication --start
--name container2_replica --role target
Replication configuration updated successfully.
Replication Container
Replication Role
Replication Source System IP
Replication Source Container
Replication Enabled
--stop, --name <name>, --role <source | target>
To stop the replication process on an existing replication link to a container in
a DR4000 system, enter the example command string at the system prompt:
administrator@mydr4000 > replication --stop
--name swsys-59_replicate --role source
Replication configuration updated successfully.
Replication Container
Replication Role
Replication Source System IP
Replication Source Container
Replication Enabled
--limit, --speed <<num><kbps | mbps | gbps> | default>, --target <ip
address | hostname>
To limit the bandwidth used during replication, define a bandwidth limit
using the following settings:
•
Kilobytes/second (kbps)
•
Megabytes/second (mbps)
•
Gigabytes/second (gbps)
•
Unlimited bandwidth (which is the default); minimum allowed bandwidth
setting is 192 kbps
: container2_replica
: Target
: 10.25.19.5
: container2
: Yes
: container2_replica
: Target
: 10.25.19.5
: container2
: No
Managing DR4000 System Storage Operations
93