Power On Configuration - Asus DSEB-D16 Series User Manual

4.4.7

Power On Configuration

This sub-menu allows you to change Power On Configuration features. Select an
item then press <Enter> to display the configuration options.
Advanced
Power On Configuration
Restore On AC Power Loss
Resume On Ring
Resume On PME#
Resume On RTC Alarm
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Restore on AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume On Ring [Disabled]
When set to [Enabled], the system will generate a wake event when the external
modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On PME# [Disabled]
When set to [Enabled], the system enables the PME to generate a wake event
while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
ASUS DSEB-D16 Series
BIOS SETUP UTILITY
[Last State]
[Disabled]
[Disabled]
[Disabled]
Options
Power Off
Power On
Last State
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4-25