Table of Contents
Advertisement
The Select New Array Type screen apprears.
4.
Use the arrow keys to select Create IS Volume, then press <Enter>.
LSI Logic Config Utility
Select New Array Type -- SAS1068
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
The Create New Array screen shows the disks you can add to make up
5.
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Logic Config Utility
Create New Array -- SAS1068
Array Type:
Array Size(MB):
Slot
Num
0
1
2
3
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
By default, the RAID Disk field shows No before array creation. This field is
grayed out under the following conditions:
•
•
•
•
5-46
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 8 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
Device Identifier
SEAGATE ST373454SS
SEAGATE ST373454SS
SEAGATE ST373454SS
SEAGATE ST373454SS
F1/Shift+1 = Help
The disk does not meet the minimum requirements for use in a RAID array.
The disk is not large enough to mirror existing data on the primary drive.
The disk has been selected as the Hot Spare for the RAID array.
The disk is already part of another array.
v6.18.00.00 (2007.08.07)
v6.18.00.00 (2007.08.07)
IS
102996
RAID
Hot
Drive
Disk
Spr
Status
0003
[Yes]
[NO]
------- ----
0003
[NO]
[NO]
------- ----
0003
[Yes]
[NO]
------- ----
0003
[Yes]
[NO]
------- ----
C = Create array
Pred
Size
Fail
(MB)
70007
70007
35003
35003
Chapter 5: RAID configuration
Advertisement
Table of Contents
