IBM 419452u - Servers System X3250 M2 Xeon 3.0ghz Installation Manual page 54

40
IBM System x3250 M2 Types 4190 and 4194: Installation Guide
Table 4. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See the parts listing in the Problem Determination and Service Guide to determine
which components are customer replaceable units (CRU) and which components
are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must
be performed only by a trained service technician.
Error code Description
00012000 Processor machine check error.
00019701 Microprocessor x is not functioning
or failed the built-in self-test.
01298001 No update data for microprocessor
1.
01298101 Bad update data for
microprocessor 1.
Action
1. (Trained service technician
only) Reseat the
microprocessor.
2. Replace the following
components one at a time, in
the order shown, restarting the
server each time:
a. (Trained service technician
only) Microprocessor
b. (Trained service technician
only) System board
Make sure that microprocessor x is
installed correctly. If the problem
remains, call for service.
1. Update the BIOS code again
(see the Problem
Determination and Service
Guide on the IBM System x
Documentation CD).
2. (Trained service technician
only) Reseat the
microprocessor.
3. (Trained service technician
only) Replace the
microprocessor.
1. Update the BIOS code again
(see the Problem
Determination and Service
Guide on the IBM System x
Documentation CD).
2. (Trained service technician
only) Reseat the
microprocessor.
3. (Trained service technician
only) Replace the
microprocessor.