dot1x port-control
Controls the authorization of a port state.
Synopsis
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
Operands
auto
forced-authorized
force-unauthorized
Defaults
The default port state is auto.
Command
Interface configuration mode
Modes
Description
Use this command to control the authorization of a port state. Use the no dot1x port-control
command to return to the default setting.
Usage
There are no usage guidelines for this command.
Guidelines
Examples
To enable the port state to auto:
See Also
none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Enables authentication on port.
Forces a port to remain in an authorized state.
Forces a port to remain in an unauthorized state.
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#dot1x port-control auto
17
dot1x port-control
271