Qos Rcv-Queue Multicast Rate-Limit - Dell 8 Command Reference Manual

16

qos rcv-queue multicast rate-limit

qos rcv-queue multicast rate-limit
Configures a cap on the maximum rate for multicast packet expansion.
Synopsis qos rcv-queue multicast rate-limit rate [burst burst-size]
no qos rcv-queue multicast rate-limit
Operands rate
burst burst-size
Defaults The default burst size is 4096 packets. The default rate value is 3000000pkt/s.
Command Global configuration mode
Modes
Description Use this command to configures a cap on the maximum rate for multicast packet expansion, for
example packet replication. This rate limit is applied uniformly across the entire system. This rate
limit is enforced independently by each switch. Use the no qos rcv-queue multicast rate-limit
command to return the multicast packet expansion rate limit to the default settings.
Usage There are no usage guidelines for this command.
Guidelines
Examples To lower the maximum multicast packet expansion rate to 10000pkt/s:
To return the system to the default multicast packet expansion rate limit values:
See Also qos rcv-queue multicast
254
Specifies the maximum rate for multicast packet expansion in units of
packets per second (pkt/s). This places a cap on the sum of the first level
expansion, for example the ingress packets replicated for each egress switch
plus the second level expansion, for example packets replicated for egress
interfaces on the switch. The range of valid values is 6500-20000000 pkt/s.
Configures a cap on the maximum burst size for multicast packet expansion,
for example packet replication. The burst size represents the maximum
number of multicast packet expansion that can be performed back-to-back
as a single burst in units of packets (pkt). The range of valid values is
50-65535 pkt.
switch(config)#qos rcv-queue multicast rate-limit 10000
switch(config)#no qos rcv-queue multicast rate-limit
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01