JVC TK-T8101WPRU Instructions Manual page 9

Ir bullet camera

Hide thumbs Also See for TK-T8101WPRU:

Table of Contents

Installation

Step 2: Pass all the signal cables through the hole for the cables.

Optionally connect a video monitor to the BNC connector if you want to perform focus/zoom adjustments

during the installation.

Step 3: For static electricity protection, ensure that the rubber pad is placed inside

the mounting bracket base.

Step 4: Modify the position of camera

Loosen the two screws (left and right) first (just rotate slightly one circle or the screws will fall down),

second, rotate the Retaining ring then you will be able to hold the camera and adjust its angle. Fasten

the screws and retaining ring to ensure the desired angle.

Table of Contents

Tk-t8101wpre