JVC TK-AM200U - Active Movement Color Dome Camera Instructions Manual page 32

Memo:
Minimum 70 ms or more is required for the camera body to detect the switched condition of the
contact.
Example: In the case of MAKE
3.
Setting of Alarm Condition Duration (DURATION)
Set how long the alarm condition should last from when the alarm signal is supplied.
( See page 24.)
Memo:
When a new alarm signal is input during the alarm condition, the alarm condition is prolonged.
4.
Setting the Alarm Position (POSITION)
Set the preset position to be invoked when the alarm condition is generated.
( See page 24.)
5.
Setting the Alarm Text Size (ALM. TEXT SIZE)
The "ALARM" text indication can be displayed on the screen to indicate the alarm con-
dition when this is generated. The size of the characters should be set. ( See page
20.)
Alarm detection
SHORT
OPEN
70 ms or
more
Alarm detection not
guaranteed
70 ms
33