Table of Contents
Advertisement
Programming
Use the OSD (On-Screen Display) to program your HCD544
camera.
OSD Menu Controls
Figure 5
When no buttons are pressed, the menu display turns off
automatically after five minutes. Your changes will not be
saved.
Document 800-01954 Rev A
08/08
OSD Menu Controls
Navigating through the menus
ENTER (middle control)
Press and hold two seconds
to access the main SETUP
menu.
Press to enter a screen or
select a menu option.
!
"
,
Move horizontally to and
between menus and options.
Increase/decrease the value.
The menu/option blinks when
selected.
#
$
,
Move vertically to and between
menus and options. The menu/
option blinks when selected.
..
"
" indicates submenus.
Select the menu, then press
ENTER.
Select RETURN, then press
ENTER to return to the previous
menu.
Select SAVE AND EXIT, then
press ENTER, to save your
changes. Settings remain in
effect when power is turned off,
then on again.
11
Advertisement
Table of Contents
