Editing Or Deleting Scan Configurations - Xerox XDM5205DWU - DocuMate 520 User Manual

Scanning

Editing or Deleting Scan Configurations

62
NOTE: Your scanner comes with a number of configurations
pre-set at the factory. We recommend that you keep those
configurations locked and do not edit or delete them. That way,
you will always have the factory-settings available. If you do edit
or delete them, and want to get the factory pre-sets back again,
you will need to uninstall then re-install your scanner.
To edit or delete a scan configuration:
1. Open the One Touch Properties window and click the tab of the
button that has the scan configuration to edit or delete.
2. Select the scan configuration you want to edit or delete.
3. To delete the configuration, click the Delete button.
NOTE: If the Delete button is not available, the selected
configuration is locked and cannot be deleted. You must first
click the Edit button and unlock the configuration, as explained
in the next steps.
4. To edit the configuration, click the Edit button.
The Scan Configuration Properties dialog box opens for that
configuration.
You can make changes to a configuration, but for the changes
to be saved, the configuration must first be unlocked.
Select the button that has
the configuration you want
to edit or delete.
Select the scan configuration
to edit or delete. It must be
unlocked, as indicated by not
having a lock displayed here.
DocuMate 520 Scanner User's Guide