Care And Maintenance; Cleaning The Scanner Glass; Cleaning The Automatic Document Feeder - Xerox XDM5205DWU - DocuMate 520 User Manual

Care and Maintenance

Cleaning the Scanner Glass

Cleaning the Automatic Document Feeder

DocuMate 520 Scanner User's Guide
Regular maintenance of your scanner can help to ensure continual
optimal performance.
Scanning items that have excessive amounts of dirt or dust may
dirty the glass. To ensure the best quality scanned item, wipe the
scanner glass with a soft clean cloth to rid the glass of dust or other
debris.
You may need to clean the ADF feed mechanism if your scanned
documents do not feed easily into the ADF, or several feed in at the
same time.
To clean the ADF:
1. Wet a soft cloth with some Isopropyl rubbing alcohol (95%).
2. Open the ADF cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean
its entire surface.
NOTE: Please be careful when cleaning the roller. The roller is
designed to rotate in one direction only. As you're cleaning the
roller, make sure it rotates easily, and continue rotating it in that
direction while wiping it clean. Do NOT force the roller to rotate
in the opposite direction. Forcing the roller to rotate will damage
it, and may cause the scanner to feed pages incorrectly.
4. Wipe the ADF pad from top to bottom. Be careful not to snag
the cloth on the springs on either side of the pad.
5. Close the cover when you're finished.
Maintenance
125