Fujitsu fi-6230 Operator's Manual page 96

fi-6130 / fi-6230 Image Scanner Operator's Guide
3.12 Color/Monochrome Auto Detection
This scanner features automatic detection of color or black-and-white document scans (the term "scan," in this case, refers to a
produced image by scanning).
Scanning color documents produces color (or grayscale) images, and scanning black-and-white documents produces black-and-
white images.
* Depending on the application to use, this function may not work properly.
Configure Multi Image settings using the scanner driver.
The following shows the procedure to change settings in the setup dialog box of the FUJITSU TWAIN 32 Scanner Driver.
1. Place the document on the scanner.
For how to load documents on the ADF paper chute, see Section
For how to load documents on the Flatbed, see Section
only]."
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs]
Then, ScandAll PRO starts up.
3. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver's setup dialog box, see Section
4. In the [TWAIN Driver] dialog box, mark the [Enable Multi Image] checkbox.
"2.2 Loading Documents on the ADF for
"2.3 Loading Documents on the Flatbed for Scanning [fi-6230
[Fujitsu ScandAll PRO] [Fujitsu ScandAll PRO] in the order presented.
TROUBLESHOOTING
CONTENTS MAP
TOP
Scanning."
"2.6 How to Use ScandAll PRO."