Fujitsu 5015C - fi - Sheetfed Scanner Operator's Manual page 64

5. Press the center of the ADF to close it until it clicks.
6. Reset the Pick roller counter.
1) Check that the scanner is connected to your PC and turn on the scanner.
2) Open the [Scanners and Cameras] from the control panel of your PC.
3) Open the [Properties] of [fi-5015C] from the [Scanners and Cameras].
⇒ The [Properties of fi-5015C] dialog box appears.
4) Click the "Device Set" tab.
5) After clicking the [Clear] button besides "Pick roller" in "Page Counter", click the [OK]
button.
⇒ The following window appears.
Click the [OK] button.
The Pick roller counter returns to "0".
50