Fujitsu 5015C - fi - Sheetfed Scanner Operator's Manual page 54

• Pad ASSY
Wipe Pad ASSY with the cloth in the direction from bottom to top.
Mylar
sheet
ATTENTION
• Pick roller unit
Wipe the Pick roller unit by moving the cloth from side to side of rollers. Rotate the rollers
forward with your finger and repeat the wiping procedure until all surface of roller are
cleaned.
• Pinch rollers
Clean Pinch roller softly not to damage its surface. Try to remove any black stain which
may degrade the performance of paper feeding
3. Push in the center of the ADF to return it to its original position, until it clicks.
ATTENTION
40
Be careful not to hook the pick springs, sensor lever and mylar sheet
near the Pad ASSY.
Close the ADF until it clicks. Paper jams or feeding errors may occur if the
ADF is not closed completely.
Pick Springs
Sensor
lever