Symantec 14541094 - pcAnywhere Host & Remote Administrator's Manual page 51

You can also include additional files to support the deployment of third-party
applications.
To customize Files.ini for package deployment
1
In a text editor, open
2
In the [General] section, edit the line LaunchApplication= so that it references
the package executable file that you want to start after the download
completes.
For example:
LaunchApplication=Symantec pcAnywhere - Full Product.exe
3
If you are deploying multiple files, edit the FileCount= line to reflect the
number of files that you want to deploy.
The default setting is FileCount=1.
4
In the [Files] section, edit the line File1= so that it references the name of the
package that you want to deploy.
For example:
File1=Symantec pcAnywhere - Full Product.exe
Long file names are supported.
5
For each additional file, add a new Filen= filename line, where n is a unique
number and filename is the name of the file.
6
Save and close the file.
Customizing Files.ini for MSI deployment
Modify Files.ini to contain the names of the .msi files that you want to deploy.
MSI deployment requires Launch.bat, which is used to start the installation
program. You must also modify Files.ini to reference the Launch.bat file.
See "Customizing Launch.bat"
You can also include additional files to support the deployment of third-party
applications.
Deploying Symantec pcAnywhere custom installations
Deploying installation packages using Web-based deployment
.
Files.ini
on page 52.
51