Related Manuals for Encore ENUTV-DVB-S
Summary of Contents for Encore ENUTV-DVB-S
- Page 1 ENUTV-DVB-S DVB-S USB TV Tuner (USB DVB-S Video Capture Box / Personal Video Recorder) ENUTV-DVB-S Series User’s Guide Version 1.0...
- Page 2 ENUTV-DVB-S User’s Guide - User’s Notice This manual is provided “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall we, its directors, officers, employees or agents...
-
Page 3: Table Of Contents
Chapter 2: Getting Started...5 2.1 - ENUTV-DVB-S Hardware Installation...5 2.2 - Device Driver Installation ...6 2.3 - Install the DirectX® ...7 2.4 - Install the ENUTV-DVB-S Application..8 Chapter 3: Launch the ENUTV-DVB-S Program ...10 3.1 LNB Setting ...11 3.1.1 Load Satellite ...11 3.1.2 Add Satellite ...13... -
Page 4: Chapter 1: Introduction
ENUTV-DVB-S User’s Guide - Chapter 1: Introduction 1.1 - Package Contents The following items are included in the ENUTV-DVB-S package. CD Setup Disc (includes Software Driver and Utility Software) ENUTV-DVB-S device Remote Controller Power adapter User’s Guide or Quick Installation Guide 1.2 - System Requirements... -
Page 5: Chapter 2: Getting Started
ENUTV-DVB-S User’s Guide - Chapter 2: Getting Started 2.1 - ENUTV-DVB-S Hardware Installation Step1: Connect the USB port of PC and DVB-S device with USB cable Step2: Connect satellite signal to DVB-S Step3: Connect power socket and power the device on... -
Page 6: Device Driver Installation
Hardware Installation in the previous section.) Turn on or restart your computer. Place the software CD-ROM that comes with the ENUTV-DVB-S in the CD-ROM drive. Then follow the on-screen installation guide below. Device driver installation for Windows® XP Home/Professional Edition 1. -
Page 7: Install The Directx
ENUTV-DVB-S User’s Guide - 2.3 - Install the DirectX® Microsoft DirectX® allows 3D hardware acceleration support in Windows® 98, 2000, Windows® XP/64 bits and Windows Vista™ 32-bit/64-bit. For software MPEG support in Windows 98, you must first install Microsoft DirectX®, and then a MPEG compliant video player. -
Page 8: Install The Enutv-Dvb-S Application
ENUTV-DVB-S User’s Guide - 2.4 - Install the ENUTV-DVB-S Application. 1. Install TV application on Windows XP Home/Professional Edition 3. Click “Accept the agreement” radio button then click “Next” 4. Click “Next” to confirm the installation of DirectX 5. Click “Finish”... - Page 9 ENUTV-DVB-S User’s Guide - 3. Click “Next” button to start the ENUTV-DVB-S Installation 4. Click “Next” button to accept the default location or choose a different folder Note: We recommend you not to change the default location. 5. Install wizard will configure your new software installation.
-
Page 10: Chapter 3: Launch The Enutv-Dvb-S Program
ENUTV-DVB-S User’s Guide - Chapter 3: Launch the ENUTV-DVB-S Program First you open the software through double clicking the icon of “DVBPlayer” on the desktop. By this time, you will see a window such as the following display. -
Page 11: Lnb Setting
ENUTV-DVB-S User’s Guide - 3.1 LNB Setting In the main menu, click the right key on the mouse to display a list, and select “LNB Setting”. You can also click the button on the bottom-right of main menu to display the LNB Setting window. - Page 12 ENUTV-DVB-S User’s Guide - There are many different satellites, load a default satellite in the transponder list. Click [Load] button under the satellite item. The following picture will display on the screen. Or, you can choose the satellite you need.
-
Page 13: Add Satellite
ENUTV-DVB-S User’s Guide - 3.1.2 Add Satellite Add a new satellite in the transponder list. Click [Add] button under the Satellite item and select New again in the next submenu. 3.1.3 Modify Satellite Click [Modify] button in the [satellite] column. The satellite parameters dialog box will appear... -
Page 14: Delete Satellite
ENUTV-DVB-S User’s Guide - 3.1.4 Delete Satellite Delete a satellite in the transponder list. First select the satellite and press the Del button to delete 3.1.5 DiSEqC Setting DiSEqC1.2 is a special protocol for dish motor which drives the dish to aim the satellite. -
Page 15: Channel Scanning
ENUTV-DVB-S User’s Guide - 3.2 Channel Scanning Click the [Scan] button to display the Program Scan menu. In the menu, you can click the small pane to select transponder under the current satellite to search channels. You can also click the [Select All] button to select all transponder to scan channel. -
Page 16: Transponder Parameters
ENUTV-DVB-S User’s Guide - 3.3 Transponder Parameters 1. Add transponder Add a new transponder in the transponder list. The following figure is transponder parameter dialog box. a) Name: Enter the new name of the TP. b) [Frequency (MHz)] This box indicates the down link frequency of the current transponder. -
Page 17: Ip Receiver
ENUTV-DVB-S User’s Guide - 2. Modify transponder Click the [Modify] button in the [transponder] item. The transponder parameters dialog box will pop up again. 3. Delete transponder Delete a transponder in the transponder list. Select one transponder and press Del. - Page 18 ENUTV-DVB-S User’s Guide - 3. Available PID Show searched data PID under the current transponder in the table. (Standard PID) 4. Active PID This item shows the current active PID. 5. PID (Hex) Input the PID provided by your service provider.
-
Page 19: Chapter 4: Application Programs
ENUTV-DVB-S User’s Guide - Chapter 4: Application Programs 4.1 Capture Click the button to open the capture dialog box. When playing, click [Capture] button to capture one still picture and add to the capture window. Click [Save] button to store the captured picture. -
Page 20: Epg
ENUTV-DVB-S User’s Guide - When the program broadcasts to the starting time that you have established just now, the state appears of recording and producing the button. If you want to watch programs that you record and produce, click button, it will broadcast from TV window switch over to record programs window, then select the recording program that you want to watch from right column, pressing the right key can be loaded and recorded the file. -
Page 21: Function Buttons Overview
ENUTV-DVB-S User’s Guide - 2. Advanced (1) Decoder: Click the “ (2) Time Zone: Click the “ 4.5 Function buttons overview 1. Play Click the button to play the selected channel, recording file in playing status. Click the button to stop the selected channel, recording file in stop status. -
Page 22: Chapter 5: Using The Remote Control
ENUTV-DVB-S User’s Guide - Click “Sat” to display all satellites. Click “Fav” to display all the favorite channels. Click “All” to display all channels. Click “V” to display all TV programs. Click “R” to display all Radio programs. Chapter 5: Using the Remote Control... -
Page 23: Chapter 6: Trouble Shooting
ENUTV-DVB-S User’s Guide - Chapter 6: Trouble Shooting If any trouble in installation and operation of the DVB-S, please refer to this section or contact the after-sales service department. 6.1 Hardware trouble shooting: If the DVB-S device can not be detected by Windows XP Home/Pro SP2 during the installation, please check the following items: (1) Check whether the USB jack of the PC and the USB cable is OK. - Page 24 2008/06/30 Version: 1.01...