Encore ENTC-1000 - V1.04 User Manual page 43

ENTC-1000 Encore Thin Client
User Manual v1.0
4. The second tab is the "Network" tab. Use this tab to configure
basic IP setting of ENTC-1000.
Initially, the dialog displays the current network settings. Click
the "Make Changes" button to modify these settings. When you
are done, click "Apply Changes" to make your changes
effective, or "Discard Changes" to cancel.
The user can specify whether DHCP should be used to
automatically acquire an IP address. If DHCP is not used, user
must manually enter IP address, subnet mask, default gateway,
and DNS server address. Please consult network
administrator in case manual entering is required.
Page 43 of 51
Copyright © 2007 Encore Electronics, Inc.