Encore ENTC-1000 - V1.04 User Manual page 41

ENTC-1000 Encore Thin Client
User Manual v1.0
3. Device will now enter initial dialog. There are 3 tabs on the
dialog. Each serves a different purpose.
First tab is the "connection" dialog. The dialog will display a
different input parameter depending on which protocol you
want to use.
The above dialog is displayed when the Windows server,
which uses "RDP", Remote Desktop Protocol, is chosen. User
can specify the following parameters.
Server Address, the IP address or name of the server.
Color Depth, the lower the color depth, the better the
response time; the higher the color depth, the shaper the
display.
Audio Playback audio playback can be turned off, controlled
Page 41 of 51
Copyright © 2007 Encore Electronics, Inc.