Desa Comfort Glow CGR35NA Owner's Operation And Installation Manual page 16

INSTALLING
HEATER
Continued
16
6. Insert top edge of glass panel into the upper glass retaining channel (see Figure 12).
Make sure you insert top edge of glass panels into the
upper glass retaining channel. Do not install glass
panels with top edge of glass in front of the upper glass
retaining channel. Glass panels will not automatically
go into the channel. You must guide the glass panels
into it. Incorrect installation will damage front of heater
due to excess temperatures.
Upper Glass
Retaining Channel
Lower Glass
Retaining Channel
Lower Front Access Area
Figure 12 - Inserting Top Edge of Glass Panel into
7. Lower glass into lower glass retaining channel. Slide glass panel all the way to the
left side.
If you have chipped or cracked a glass panel during installation, do not
Note:
use. Contact DESA International's Technical Service Department at 1-800-
323-5190 for a replacement glass panel.
Figure 13 - Inserting Glass into Lower Retaining Channel
8. Repeat steps 4 through 7 for all glass panels.
9. Reinstall glass guard. Reinstall lower front access panel of heater.
CAUTION
WARNING ICON G 001
1
Glass
Panel
2
Upper Glass Retaining Channel
Glass
1
Panel
Lower Glass
Retaining
Channel
2
100792