MAC Table: Use this section to create a user profile which Internet access is denied or allowed.
The user profiles are listed in the table at the bottom of the page. (Note: Click anywhere in the
item. Once the line is selected, the fields automatically load the item's parameters, which you
can edit.)
Name: Type the name of the user to be permitted/denied access.
MAC Address: Type the MAC address of the user's network interface.
Add: Click to add the user to the list at the bottom of the page.
Update: Click to update information for the user, if you have changed any of the fields.
Delete: Select a user from the table at the bottom of the list and click to remove the user profile.
Clear: Click to erase all fields and enter new information.
IP Filters
The IP filter function enables you to define a minimum and maximum IP address range filter;
all IP addresses falling within the range are not allowed Internet access. The IP filter profiles
are listed in the table at the bottom of the page. (Note: Click anywhere in the item. Once the
line is selected, the fields automatically load the item's parameters, which you can edit.)
Figure 54
48