Dual XDM6400 Installation & Owner's Manual page 7

XDM6400 OPERATION
General Operation
Press rotary encoder momentarily to select between
Audio
Volume (default), Bass, Treble, Balance, & Fader.
VOLUME BASS TREBLE BALANCE FADER
Press rotary encoder until BAS appears then rotate encoder
Bass
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until TRE appears then rotate encoder
Treble
left/right to adjust ( -6 minimum / +6 maximum).
Press rotary encoder until BAL appears then rotate encoder
Balance
left/right to adjust (BAL L 1-BAL 00-BAL R 1).
BAL 00 represents equal balance
Press rotary encoder until FAD appears then rotate encoder
Fader
left/right to adjust (FAD F 1-FAD 00-FAD R 1).
FAD 00 represents equal fader
Individual Bass and Treble settings are retained in memory
Source Audio Memory
for tuner, CD, AUX, USB and Bluetooth modes. This allows
you to save the Bass and Treble settings separately for each
mode.
Note:
Any adjustment to the Bass or Treble settings automatically
cancels the current EQ curve (if one is selected).
7