Desa Comfort Glow CGD3930N Owner's Operation And Installation Manual page 30

OPTIONAL
POSITIONING
THERMOSTAT
SENSING BULB
For Masonry and
Factory-built
Metal Fireplace
Continued
30
Thermostat
Sensing Bulb
OF
Adhesive-backed
Mounting Clip
Figure 29 - Locating Thermostat Sensing Bulb on Masonry Fireplace
If you have a factory-built metal fireplace, see Figure 30 for location.
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Figure 30 - Locating Thermostat Sensing Bulb on Factory-built Metal Fireplace
If your fireplace has glass doors, position sensing bulb directly behind door gap on right
bottom side (see Figure 31).
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Figure 31 - Installing Thermostat Sensing Bulb behind Glass Doors
5. The mounting clip must be a minimum of 3" from bottom of fireplace to
prevent crimping of capillary. Once you have decided on a location, clean the
area thoroughly. Remove the paper backing from the adhesive on back of
mounting clip. Press the clip into the new location so that the thermostat
sensing bulb will be positioned vertically with the capillary at the bottom (see
Figure 32). Slide the thermostat sensing bulb into the clip.
IMPORTANT:
Figure 32 - Positioning the Thermostat Sensing Bulb in the Vertical
Do not crimp capillary.
Capillary
Position with the Capillary at the Bottom
Q Q
Q Q
Q Q Q Q
Q Q Q Q Q
Glass
Doors
Thermostat
Sensing Bulb
Adhesive-backed
Mounting Clip
Do Not Crimp Capillary
102990