Planning Information; Model Options; Installation Considerations - Thermador PRD486EDG Design Manual

PRO GRAND® RANGES

MODEL OPTIONS

there are three sizes of thermador pro grand® ranges
to choose from—30-inch, 36-inch and 48-inch—in
your choice of all-gas or dual-fuel con gurations. all
models are 27-inch deep and available in stainless steel
or exclusive models available with porcelain cooktop.
Dual-fuel models are lp Convertible by ordering plpkit.
all-gas models are available in natural gas or liquid
propane (lp) and should be ordered separately from
the factory. Be sure to reference the correct model
information in this design guide.

INSTALLATION CONSIDERATIONS

the information in this design guide provides key
features, product dimensions, cutouts and installation
speci cations. Before installing a thermador pro grand
range, be sure to verify the cutout dimensions and
electrical/gas connections. also, always consult with
the installation manual packed with the product for
complete details before installing.
ELECTRICAL AND GAS SPECIFICATIONS
Be sure your appliance is properly installed and
grounded by a quali ed technician. installation,
electrical and gas connections, and grounding must
comply with all applicable local codes.
GAS REQUIREMENTS AND hOOKUP
verify that the type of gas being used at the installation
site matches the type of gas used by the appliance. if an
lp kit is utilized (plpkit), conversion from natural gas
to propane must be done by quali ed service personnel
only. please refer to the lp Conversion instructions for
further information.
a manual gas shutoff valve must be installed external to
the appliance, in a location accessible from the front, for
the purpose of shutting off the gas supply. the supply
line must not interfere with the back of the unit.
NATURAL GAS REQUIREMENTS:
inlet Connection: 3 / " npt external,
4
(minimum 3 / " diam. flex line)
4
supply pressure: 6" min. to 14" max. water column
(14.9 to 34.9 mb)
manifold pressure: 5" water column (12.5 mb)
PROPANE GAS REQUIREMENTS:
inlet Connection: 3 / " npt external,
4
(minimum 3 / " diam. flex line)
4
supply pressure: 11" min. to 14" max. water column
(27.4 mb to 34.9 mb)
manifold pressure: 10" water column (24.9 mb)
22

PLANNING INFORMATION

DUAL-FUEL:
thermador pro grand Dual-fuel ranges are dual rated, designed to be
connected to either 240/208v aC, 60 hz, 4 wire, single-phase power supply.
the connection may be made with a range supply cord kit (purchased
separately) or by hard-wiring to the power supply. a dedicated circuit breaker
is required.
MODEL
prD304eg
prD366eg
prD366epg
prD364eDg
prD364eDpg
prD486eDg
prD486eDpg
ALL-GAS:
thermador pro grand all-gas ranges are equipped with a 3-prong plug
and are designed to be connected to a 120v aC, 60 hz, single-phase power
supply. a dedicated circuit breaker is required.
MODEL
prg304eg - ng
prl304eg - lp
prg366eg - ng
prl366eg - lp
prg366epg - ng
prg364eDg - ng
prl364eDg - lp
prg486eDg - ng
prl486eDg - lp
prg486eDpg - ng
prl486eDpg - ng
1 / " npt internal
2
Important: the cord supplied with gas ranges having an electric griddle
requires a nema 5-20 receptacle as shown here. local codes my require a
different wiring method. a dedicated 20 amp service is required for
proper operation.
1 / " npt internal
2
RECEPTACLE
PLUG
NEMA 5-20
REQUIRED CIRCUIT BREAKER
240/208v aC, 60hz
35 amp
35 amp
35 amp
35 amp
35 amp
50 amp
50 amp
REQUIRED CIRCUIT BREAKER
120v aC, 60hz
15 amp
15 amp
15 amp
15 amp
15 amp
20 amp
20 amp
20 amp
20 amp
20 amp
20 amp